or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › Lump Charcoal vs Briquette Amounts
New Posts  All Forums:Forum Nav:

Lump Charcoal vs Briquette Amounts

post #1 of 6
Thread Starter 

I am new to the smoking world but learned quickly that lump charcoal is the way to go.  Is there anything that tells you how much lump to use?  I have a chart for my Weber smoker that says for pork butt you start with 75 briquettes and add as necessary...  how much lump is that?

 

Any help is greatly appreciated.

post #2 of 6
I use about 1/2 -2/3 chimney to start and light about 2/3 chimney and put in the center of that for the minion method with some chunks around the sides



Happy Smoking,
phatbac(Aaron)
post #3 of 6
Personally, I think Weber is pretty darned optimistic with making a chart like that. There are so many variables. Ambient temp, wind, size and density of the meat and how many times you peek just to name a few. Try to judge by trial, error and practice. Look at the quantity of your cook and how long. Put in what you think will be enough. If it's too much or too little, make an adjustment next time. It's just like wood splits. You can't remove two, half burned pieces of wood after you're done with cooking.

Good luck and have fun and some good food while you're figuring it out. Joe
post #4 of 6
Thread Starter 

Thanks all.  I appreciate the feedback.

post #5 of 6

I usually just fill mine up. When your done cooking just shut all the vents & the fire will go out.

Then next smoke just shake the ash off & use what's left, or add more as needed.

 

Al

post #6 of 6
I am with Al on this one just fill up and shut down all vents when your done. The rest of the coals will be saved for the next smoke!


Chris
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Charcoal Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › Lump Charcoal vs Briquette Amounts