or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Other Builds › 120 gallon Hybrid Gas Pig Roaster/Grill/Smoker build.
New Posts  All Forums:Forum Nav:

120 gallon Hybrid Gas Pig Roaster/Grill/Smoker build.

post #1 of 9
Thread Starter 

This is a 120 gallon smoker/grill combo using the center section of a 5 burner grill as it's heat source, and a small side firebox to burn charcoal and wood chips, or small splits of wood for smoke,. You can high heat grill on the original 5 burner grates, or the first 24by36 inch cooking grate, drop in the waterpan/indirect heat diffuser,and low temp roast or smoke using 2 or 3 burners. You can use all 5 burners to use it as a high heat roaster or oven. the front shelf swings down for storage.Intel(R) JPEG Library, version 1,5,4,36Tank cut

 

Intel(R) JPEG Library, version 1,5,4,36Swing down shelf

 

Intel(R) JPEG Library, version 1,5,4,36

 

Intel(R) JPEG Library, version 1,5,4,36Shelf up

 

Intel(R) JPEG Library, version 1,5,4,36Door open

 

Intel(R) JPEG Library, version 1,5,4,36

 

Intel(R) JPEG Library, version 1,5,4,36Door closed


Edited by SmokinHawgBBQ - 5/15/16 at 7:11pm
post #2 of 9
Thread Starter 

More Build PicsIntel(R) JPEG Library, version 1,5,4,36Gas tank mount added

 

Intel(R) JPEG Library, version 1,5,4,36Side Fire Box

 

Intel(R) JPEG Library, version 1,5,4,36Slide out charcoal or wood tray

 

Intel(R) JPEG Library, version 1,5,4,36Lid support Springs

 

Intel(R) JPEG Library, version 1,5,4,36Going to the sandblaster

 

Intel(R) JPEG Library, version 1,5,4,36Back from sandblasting


Edited by SmokinHawgBBQ - 5/15/16 at 7:15pm
post #3 of 9
Thread Starter 

More PicsIntel(R) JPEG Library, version 1,5,4,36Shelf above side firebox for remote Temp Gauges

 

Intel(R) JPEG Library, version 1,5,4,364 coats of Rustoleum High heat Black Framework will be gloss black

 

Intel(R) JPEG Library, version 1,5,4,36

 

Intel(R) JPEG Library, version 1,5,4,36

 

Intel(R) JPEG Library, version 1,5,4,36Front shelf Gloss black and Burnt Copper Metallic

 

Intel(R) JPEG Library, version 1,5,4,36

 

Intel(R) JPEG Library, version 1,5,4,36  5 Burner original cooking grates

 

Intel(R) JPEG Library, version 1,5,4,36  5 Burner center section added for heat

 

Intel(R) JPEG Library, version 1,5,4,36  Lift out Waterpan/Indirect heat deflector under const.

 

Intel(R) JPEG Library, version 1,5,4,36 Stack and handle and gauges added

 

Intel(R) JPEG Library, version 1,5,4,36


Edited by SmokinHawgBBQ - 5/15/16 at 7:24pm
post #4 of 9

That's really a great build.

 

Looking forward to seeing it in action.

 

Al

post #5 of 9
Thread Starter 

Finished PicturesIntel(R) JPEG Library, version 1,5,4,36Lift out Waterpan/Indirect Heat Diffuser

 

Intel(R) JPEG Library, version 1,5,4,36End View

 

Intel(R) JPEG Library, version 1,5,4,36Waterpan out for Direct Grilling and 12by36 Warming shelf

 

Intel(R) JPEG Library, version 1,5,4,36 Front View

 

Intel(R) JPEG Library, version 1,5,4,36 Lower 24by36 grate in for grilling,waterpan out

 

Intel(R) JPEG Library, version 1,5,4,36 55 Burner grates for direct grilling

 

Intel(R) JPEG Library, version 1,5,4,36   Automatic Swing down Lid safety

 

Intel(R) JPEG Library, version 1,5,4,36 Waterpan in and all 3 grates for smoking,Sidebox for Woodchips or small wood splits for Smoke

 

Intel(R) JPEG Library, version 1,5,4,36 2 24by36 grates & 1 36by12 grate on anti tip slide out tracks.

 

Intel(R) JPEG Library, version 1,5,4,36

 

Intel(R) JPEG Library, version 1,5,4,36 Side shelf for Remote Therms

post #6 of 9

Wow, clean build.

You have obviously spent a lot of time on it.

Those door springs look like 88-96 Chevy hood springs. ( I remember them after getting my hand jammed in them removing a hood and needing 5 stitches).

I may have to build something similar with a parrilla and firebox below now you have given me an idea.

post #7 of 9
Thread Starter 
Quote:
Originally Posted by Ahumadora View Post
 

Wow, clean build.

You have obviously spent a lot of time on it.

Those door springs look like 88-96 Chevy hood springs. ( I remember them after getting my hand jammed in them removing a hood and needing 5 stitches).

I may have to build something similar with a parrilla and firebox below now you have given me an idea.

Those are 2000 Chevy/Gmc Springs, They are holding up a 125 pound door, I can see where you would need stiches if they bit you !! OUCH!!

Mike

post #8 of 9

Holy Chit, Mad skills brother, looks fantastic.

post #9 of 9
Wow!! I thought my build was somewhat complicated before I saw this thing!! Nice work!!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Other Builds › 120 gallon Hybrid Gas Pig Roaster/Grill/Smoker build.