or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › Hello from Las Vegas!
New Posts  All Forums:Forum Nav:

Hello from Las Vegas!

post #1 of 6
Thread Starter 

Hi all - I found this site a week or so ago and was impressed by all the information and build threads on here. I recently came into procession on an old air compressor tank. It says that it is a 30 gallon tank. The manufacture date on the tank is 1977 and it seems to be in great shape and though it would be a good candidate to turn into an RF smoker. I have never build something like that before but thought it would be a fun project. I have seen some of the calculators needed to figure out the size and the FB and the like but sure I will have many questions through this build.

 

Thanx, Bob 

post #2 of 6

Hey Bob, welcome to the site.  Good luck on the build, if you have any questions just ask.

post #3 of 6

:welcome1: To SMF glad to have you on board lot of great guys and gals on here with tons of info. Take time to read on Home page Initial Greeting it contains a lot of helpful info.

post #4 of 6

texas.gif  Good morning and welcome to the forum, from another cloudy and rainy day here in East Texas, and the best site on the web. Lots of great people with tons of information on just about  everything.

 

 

Gary

post #5 of 6

Welcome to SMF!

 

I think you can get the help with you build here.

 

http://www.smokingmeatforums.com/f/201/reverse-flow

 

Al

post #6 of 6
Thread Starter 
Thanx for the info, here are a couple of air compressor tank I plan to use for my build. As I had stated it is 30 gallons and 16x36 od. I believe I need the actual ID's to to the math.
[IMG]
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › Hello from Las Vegas!