or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Smokin-it 3 footprint
New Posts  All Forums:Forum Nav:

Smokin-it 3 footprint

post #1 of 4
Thread Starter 
I'm looking at this smoker and like the idea of setting on a craftsman toolchest. Question is, what is the outside dimensions of the feet? I have a 24" chest that is 24x13 on top. This is the next size down from the 27" that someone posted pictures of, but it looks like a fair bit of room left over. Would like to use the chest that I have and never use that's taking space in my shop.
I could always wait till I have the smoker and see how it fits, but that would be too easy. Besides, that's what this forum for, right?
Thanks for the help Gents.
post #2 of 4
Just based on the dimensions for the smoker on the Smokin-it website your tool chest is not large enough. Check it out.

UPDATE: I just measured my SI 3D - the outside measurement of the legs across the front/back is 17 1/4 inches; outside measurement front leg to back leg is 22 inches. Hope this helps.
Edited by old sarge - 4/19/16 at 6:37pm
post #3 of 4
Thread Starter 
Thanks Sarge! 👍🏻
post #4 of 4
You are welcome.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Electric Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Smokin-it 3 footprint