New here. Just finished UDS build.. Lots of pics

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

nerotxc

Newbie
Original poster
Apr 11, 2016
2
10
Hey there. New here and wanted to share my uds build.

The lid
The feet
 
Not what I was expecting when I opened this up but a nice smoker. That thing should last a lifetime! Do you like the way it cooks? One of my most favorite things about my UDS is that it is a fuel miser. It appears that your fuel door has a good seal based on the photo with it smoking. If so, you will love it. Good Job!

Jay
 
Thank you! So far it's cooking nice! I just hit 12 hours on an 11lb pork shoulder.
I had no clue how little coal my smoker would consume to stay at 225! I'm used to a cheap brinkmam. So I loaded up to tray and got her going.. Right on into 400°! Oops. I've been keeping a log. On roughly 11-12 pieces of charcoal and a me quite log I get about 2 hours of stable 210-230° heat. I have a cheap thermometer so it's hard to get an exact temp. That's with exhaust all the way open, both intakes capped, and the ball valve 1/3 open. I started at 10 last night, and while this smoker run wasn't stable over the span of the night (I overslept between alarms), I did learn the ropes of this smoker. Its very simple and very predictable.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky