or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Painting a logo on my uds build.
New Posts  All Forums:Forum Nav:

Painting a logo on my uds build.

post #1 of 4
Thread Starter 
Hey guys, how do I make my drum look like this?
post #2 of 4

Hello.  This one is easy.  Since you asked the question I will assume you are not a painter.  If you want a custom paint job you need to go to the folks who know how to do it.  Find a nearby paint and body shop.  Get a quote.  Maqny of those guys do work on the side and may be able to give you a good price.  Keep Smokin!

Danny

post #3 of 4
This is what I would do. Buy a sticker of the JD emblem. Paint the area where you want it yellow with high temp primer, then high temp paint. Follow all the directions and cure properly. Once cured apply the stricker to the painted area. If needed use an exact P knife to cut out the sticker prior to putting it on the drum. Once adhered paint the high temp green over. Before the green is fully cured, carefully remove the sticker. You may need to use an exact-o knife to to do this.
post #4 of 4
Quote:
Originally Posted by McJunkins UDS View Post

Hey guys, how do I make my drum look like this?

 

Me, the first thing I'd do before starting is go down and get a contributation for advertizing from JD!

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Painting a logo on my uds build.