Hello All

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

wiscowes

Newbie
Original poster
Jan 31, 2016
12
10
Wisconsin
Hello from Wisconsin I'm new to smoking on my own but I have been around it for quite some time I'm a welder/ fabricator and thought I could put that to use by making my own smoker I've used your forum for quite a bit of reference and would like to ask more questions and some feedback as a proceed. Thanks Guys
 
Welcome from SC, Wes. I hope you enjoy this great site. There are a lot of really good folks here who are always eager to share their ideas and tips. All you have to do is ask and keep reading. There are several guys who are excellent builders who can help you. Go to the smoker build sub-section and look around.

Good luck and keep us up to date on your build, Joe
 
GALLERY]
Thanks for the warm welcome guys here's what I have for progress so far
 
texas.gif
  Good evening and welcome to the forum, from a sunny warm day here in East Texas, and the best site on the web. Lots of great people with tons of information on just about  everything.

Gary
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky