My first reverse flow trailer build

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

skuuzmeplease

Fire Starter
Original poster
Dec 20, 2015
41
13
Ottawa ,Canada
I would like to share the progress of my trailer build and would love some input as this is my first reverse flow.I have 60% of it built.I originally thought i would construct it all from new steel and basically make two boxes as cook chamber and fire box but i was lucky enough to come across a local add for some pipe that was almost half inch thick for a low cost.The gentleman who sold me the pipe also had pretty much everything i needed to c build my project at a very good price.Of course it was all used metal so a lot of sandblasting will be required at the end.
I purchased a small utility trailer with a 3500lbs axle as the base.
 
Last edited:
That is some thick steel. Should make a great smoker.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky