SmokingMeatForums.com › Groups › New England Members Group › Discussions › Question about gasket

Question about gasket

post #1 of 5
Thread Starter 
I am looking for some input on sealing the firebox door and cooking
chamber door.
I am using the nomex lavalock gasket.
I have read some people recommend putting it on the door
and not the mating surface.
I am in the process of modding another OK Joes
on the first one I put the gasket on the mating surface because the
doors are not mounted 100% sqare and cannot be adjusted.

I am still very new to smoking and any input is greatly appreciated.

Bob
post #2 of 5
I can't help you on gasket installation, but if you will go up top and hit the search bar, you should find lots of information.

Lamar
post #3 of 5
Thread Starter 
Lamar: Are you and I the only one's on this forum? Lol
post #4 of 5
Looks like it. This group has not been very active at all for some reason.
post #5 of 5

Use high temp silicone- the one rated for 1000°F- about $17-18 a tube at Aubuchon's.

You should mount on the door, it will be less likely to get damaged when adding coals to the fire.

Sorry about the late reply, I don't come here very much lately but will try to do better.

  Return Home
  Back to Forum: New England Members Group
SmokingMeatForums.com › Groups › New England Members Group › Discussions › Question about gasket