or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Other Builds › Building a versatile cabinet smoker need advice
New Posts  All Forums:Forum Nav:

Building a versatile cabinet smoker need advice

post #1 of 2
Thread Starter 
Well will a water pan work on a vertical smoker if i have a sheet over the pan seperated from the cooking chamber to eliminate the need for tunning plates....work?there is a space between the inside wall so smoke can enter at holes in the top and exit out of the smoke stack. Will the water pan still work that way?
post #2 of 2

I have large vertical cookers. For water I use steam table pans. sit them low in the smoker. then I put lids on them that have the cutouts in the corners so the moisture can escape. this allows me to keep the water pan in the cooking chamber where it is needed, without the pan getting full of grease.  if I need to add more water during the cook I use a long neck funnel,  and a pitcher.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Other Builds › Building a versatile cabinet smoker need advice