or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Black pipe for exhaust
New Posts  All Forums:Forum Nav:

Black pipe for exhaust

post #1 of 4
Thread Starter 

Hello, 

 

Where can I find 2" black pipe for USD lid exhaust?  

post #2 of 4
It's not really needed. I use the 2" and 1" bung holes in my lid. I keep the bungs in when storing the smoker and remove both when smoking.

The big box stores won't have it. A specialty plumbing supply should have some. A steel supplier might but more than likely it won't be threaded.

Online Grainger would be your best bet.
post #3 of 4
Thread Starter 

I'll give the 2" and 1" bung holes a try!  Thanks

post #4 of 4

I found short 2 inch black pipe an caps at ace hardware. Use 1 2 inches long. I prefer the black pipe over the plain open bung as its easier to seal weather tight since my US usually sits out in the weather

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Black pipe for exhaust