Hello all, Been awhile since I've been on here. I started a 2nd smoker awhile back and figured I'd share it with you. This one was a bit tough as it was painted 6 times with rolled on painT. Stripped it down and then sanded to bare metal. Then I finished with fresh paint. here is few pics. I re Insulated it with rock wool. I used all stainless hardware and around the inside of the door I used stainless Rivets. Very Pricey. As for the bottom I used the cover and built a box, added drawer slides so I can store pellets. Must not waste the space, Right? Its all electric and I used a 1900w heater strip. http://www.grainger.com/product/TEMPCO-Heater-2XDZ6?functionCode=P2IDP2PCP. I also using this PID. http://www.auberins.com/index.php?main_page=product_info&cPath=8&products_id=381. I overall very happy with the way this one turned out. Have had several complements on my other one that I finished some time ago. This Black one here just recently sold. He has had it for few weeks now and absolutely loves it. In progress in building a # 3. Pics to come. Enjoy your day. Smoke on EVERYONE!!
