Gander Mountain 5 pound stainless stuffer for $54.99 through 11/14/2015

gomez93

Meat Mopper

Dec 4, 2013

150

13

• Nov 26, 2015

• #41

It seems I spoke too soon 

I've been careful to not bottom it out, but last night about half way through roll #8 of my summer sausage it popped and that was the end of it. It seems to be something in the inside of the bigger gear, I started taking it apart but was told by the CFO to just throw it away and we'll get a better one 

 

Looking at this one maybe: https://www.waltonsinc.com/11-lb-sausage-stuffer  

 

boykjo

Renowned Sausage Maker

Staff member

Moderator

OTBS Member

Group Lead

Apr 28, 2010

7,685

1,249

Raleigh,NC

• Nov 26, 2015

• #42

FYI

2 speed stuffing is B.S.

http://www.smokingmeatforums.com/t/154910/2-speed-vertical-stuffers

 

gomez93

Meat Mopper

Dec 4, 2013

150

13

• Nov 26, 2015

• #43

boykjo said:

 
FYI

2 speed stuffing is B.S.

http://www.smokingmeatforums.com/t/154910/2-speed-vertical-stuffers

Click to expand...

Thanks for the link, I'd heard before that the "high speed" was not for stuffing. 

But still; $200 for a 11# stainless stuffer looks pretty good to me.

 

daveomak

SMF Hall of Fame Pitmaster

OTBS Member

★ Lifetime Premier ★

Nov 12, 2010

27,123

4,979

Omak,Washington,U.S.A.

• Nov 27, 2015

• #44

15# for $169...


http://www.grizzly.com/products/15-Lb-Sausage-Stuffer-Vertical/H7776

 

knotfree

Fire Starter

Feb 15, 2013

43

12

Kamloops B.C. Canada.

• Nov 29, 2015

• #45

Knotfree said:

 
I picked up a 5lb Kitchener stuffer for "parts " that was returned because of the brass shavings. ($20) When i pulled the nylon gears out to check i found that there is a bushing with brass threads pressed into the big gear. These were stripped from too much force when it bottomed out. Have some new nylon gears on order. Just repairing it to give to a friend that wants to get started on his own sausages.

Click to expand...

For any Canadians . Princess auto has parts for the 5Lb Kitchener stuffer. The replacement gear has steel thread (into nylon gear)instead of the brass original . And only $10. Part #8315145 

 

chaded

Newbie

Jan 27, 2015

8

11

• Dec 20, 2015

• #46

I bought the 5lb gander mountain stuffer when it was on sale for Black Friday but returned it. I didn't have any issues with the plastic gears but it was the plastic crankshaft that was a problem. I marked the rod to make sure I didn't bottom out and had plenty of water in the meat, etc. but the handle rounded off the crankshaft towards the end of my first batch.

I knew there was a possibility of having issues with the plastic but I figured I would replace the gears with metal ones from LEM. As one poster thought, the LEM gears will not fit this stuffer. They made everything just a little bit different so it won't fit. The crank handle won't fit nor will the rod fit. I sent the gears back to LEM and I bought a LEM stuffer and couldn't be happier with it. Just thought I would share this.

 

daveomak

SMF Hall of Fame Pitmaster

OTBS Member

★ Lifetime Premier ★

Nov 12, 2010

27,123

4,979

Omak,Washington,U.S.A.

• Dec 20, 2015

• #47

Thumbs Up ... Good to know....

 

hank2000

Smoking Fanatic

Jan 10, 2015

482

42

Louisville, ms

• Dec 20, 2015

• #48

Must have sent out two different kinds. I got one when it was on sale for $59 a week before Black Friday it did have plastic gears but it has a metal shaft.

 

chaded

Newbie

Jan 27, 2015

8

11

• Dec 20, 2015

• #49

I would be curious to see how they mated a metal crankshaft to a plastic gear if you have a picture of it. All the ones I have seen are one piece. Here are pictures of the Gander Mtn. plastic gears and LEM metal gears side by side. The Gander Mtn. gears are on the left, LEM are on the right. 

P1030100.JPG

• chaded
• Dec 20, 2015

P1030101.JPG

• chaded
• Dec 20, 2015

P1030102.JPG

• chaded
• Dec 20, 2015

P1030103.JPG

• chaded
• Dec 20, 2015

P1030104.JPG

• chaded
• Dec 20, 2015

 

hank2000

Smoking Fanatic

Jan 10, 2015

482

42

Louisville, ms

• Dec 20, 2015

• #50

Ok I see what u call a crank shaft now. Mine is plastic what I would call a crank shaft would be the long threaded shaft the piston thread on to. The plastic gear it self would fail before the shaft that is attach to it would. Because it is moulded as one piece.

 

thesmokist

Smoking Fanatic

Oct 5, 2014

305

71

Lafayette IN

• Dec 20, 2015

• #51

I got one of the gander mnt staffers on black Friday and have not used it yet. I know shame on me for having it a month and not using it yet haha hey I'm getting there anyway after reading through this thread I did notice the crank handle does not fit the plastic shaft very well and I can see how it would round it out very easy. So to combat this I'm going to cut two straight edges on a washer to fill the gap between the handle and the crankshaft so it has a nice tight fit and won't strip the shaft.

 

bmaddox

Master of the Pit

Jan 5, 2015

1,705

144

Central FL

• Dec 21, 2015

• #52

thesmokist said:

I got one of the gander mnt staffers on black Friday and have not used it yet. I know shame on me for having it a month and not using it yet haha hey I'm getting there anyway after reading through this thread I did notice the crank handle does not fit the plastic shaft very well and I can see how it would round it out very easy. So to combat this I'm going to cut two straight edges on a washer to fill the gap between the handle and the crankshaft so it has a nice tight fit and won't strip the shaft.

Click to expand...

That is a good idea. I haven't used mine yet either so I will take a look at this first. 

 

rtbbq2

Master of the Pit

Mar 2, 2012

1,412

29

Minneapolis MN/Riding Country USA

• Dec 21, 2015

• #53

I have the same one. Good size for me. Works like a dream...

 

 

mummel

Master of the Pit

Apr 8, 2015

2,294

64

Massachusetts

• Dec 21, 2015

• #54

Cracked out 5lbs of sausage with my LEM yesterday. Works great. Love that gizmo.