or Connect
New Posts  All Forums:Forum Nav:

Big rig build

post #1 of 4
Thread Starter 
Hello. I finialy decided to jump back into business doing bbq catering. So I bought myself a nice boat trailer and several tanks to play with. At this point I have stripped the frame down. I have welded on two levelers and I have leveled it out. Starting to build the back lower section that will hold one 275 gallon tank up in end. This tank will be my firebox and Warmer. I am also posting a mock up photo to give you a loose idea of what I'm going. Thanks
post #2 of 4
Thread Starter 

ould not upload the photos from my phone. So I had to wait until I was home on the computer. These photos will go from the beggining until today.

post #3 of 4
Thread Starter 

This is the mock up. I also cut the lights off so they can later be moved.In their place I welded on a leveler on each side.

post #4 of 4
Thread Starter 

Here it is in my barn. Leveled out. Then I tack welded on the basic rear frame support for the back firebox/warmer tank

.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Builds