or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › This is what I have
New Posts  All Forums:Forum Nav:

This is what I have

post #1 of 11
Thread Starter 
[IMG]
post #2 of 11
Looks a little small!
post #3 of 11
Thread Starter 
This is what I have 325 gallons, 115" 103 sq. ft. And would love for it to stay this size any ideas or plans to go about. I haven't had time to sit and figure out all my figures yet but my biggest question is it possible to build it this siZe and to function properly
post #4 of 11
Thread Starter 
post #5 of 11
Thread Starter 
So this is small
post #6 of 11
How big of a smoker do you want / need to build.... Long and skinny doesn't work well.... unless you put the FB in the center of the CC....

You could make 2 shorter smokers out of that tank...

What are the tanks dimensions.... Diameter and length between weld seams...
post #7 of 11
Thread Starter 
Between seems is around 95.5 if I remember correctly and the diameter is around 85.5 inches
post #8 of 11
Diameter of ~ 27" is pretty small.... a lot of friction for a smoker that long to function properly... 2 each... 48" smokers would work very well....

Cut in the middle and attach the FB to the cut end...
post #9 of 11
Thread Starter 
Yea 27 in don't even know where 87 come from but anyways I've been thinking what about a hybrid
post #10 of 11
Hybrid ???
post #11 of 11
Thread Starter 
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reverse Flow
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › This is what I have