Cold smoke generator ?'s

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Smoldering pellets in the AMNPS has no moving parts... works perfect... Todd has sales on here periodically... http://www.amazenproducts.com/SearchResults.asp?Cat=12



Dave,

in this view is that a 3" pipe? I have used the AMNPS directly in the MES 40 and the creosote seems to be too much so next step is the mailbox mod. would you now if most drill and mount thru the back of the MES or going in thru the chip tray filler once removed?

Thanks,

Tom
 
Dave,

your interior is different than mine. the port on the side you are using is in my case where the chip filler tube goes in. it is below a drip tray, where as your tray appears to be below . my opening is 2 - 21/2" diameter (have not measured yet). in these pics it looks like you are using a 4" tube.. my thought is how would changing to a 3" pipe effect the efficiency of this proven mod?

Thanks,

Tom
 
All 3"..... I removed the chip filler tube and ALL related stuff.... The chip tray is on the heating element for thermal mass....
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky