post a photo

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
 
I am sorry but that don't tell me anything ! the little symbol you tell me that is above the word photoNEVER shows up on the page  where I go to read

any other ideas ?
Well, first thing we need to know is whether you are using a computer or a mobile device. They have similar browsers, but not exactly the same. If you're using a computer and if you click on "Quote" or "Reply" at the bottom of a post that you are replying to, it takes you to a text box with those symbols above it. If you are using a mobile device, you'll probably have to specify which one.
 
 
I am sorry but that don't tell me anything ! the little symbol you tell me that is above the word photoNEVER shows up on the page  where I go to read

any other ideas ?
When you click on reply it should be there,if you are using a phone,make sure it is in desk top mode.

Richie
 
Thank you for taking your time to help an old man.  My computer is a 21 inch IMAC ( I am a photographer and I need the MAC to do my work )

we could do this, If you would please send me your email address, I can send you the 2 photos I would like to post.   One is of the new controller box we made for the masterbuilt smoker a and the other is of the rotisserie my brother and I put in our masterbuilt.  You may email me at

leewalt@powerbank,net then I can get you photos to you and you can post them for me, that would be a big help.  when you email me just send a note about posting smoker photos so I know what to do when I get it

OH ! OH! OH ! you know what! no one ever told me WHERE to look for it, it DOES show up, it is under REPLY, let me try it........well could not make that work.  Let me send them to you, please

thanks

WAøAUU
 
WEll i tried it again, I did find " insert image" and I clicked on it, all I got was this little blue box that said    " an image url " but there is NO list of photos on the desk top to pick from.  That is where I run into problems.  How do I find the images to pick from ?  The chicken turned out SOOOOO good yesterday, today I am going to try a 5 pound prime rib !

thank you
 
 
WEll i tried it again, I did find " insert image" and I clicked on it, all I got was this little blue box that said    " an image url " but there is NO list of photos on the desk top to pick from.  That is where I run into problems.  How do I find the images to pick from ?  The chicken turned out SOOOOO good yesterday, today I am going to try a 5 pound prime rib !

thank you
Did the little blue box also contain a button that says "Upload Files"? If so, you have to click on that to get to the files on your computer.
 
 This is the new electronic control box I built for the Masterbuilt smoker.  I am an electronic engineer, I am also a chef, as a chef I do not cook by TIME, I cook by TEMPERATURE !  With the flip of a switch I can have the masterbuilt work just like it came from the factory, OR flip it down to modified and have two pre set temperatures or flip it to auto and use the new P. I. D. control and have an temperature I need and have it controlled to within one degree.  We did make one change, we changed the pre set of 145 to 250.  There is a lot of electronics in that box.  It took me and another electronic tech four days to build it.  The AC amp meter at the top reads 0 to 30 amps and I expect it to read around 10 to 12 amps when in use
 
  • Like
Reactions: floridasteve
Nice Bird........... glad you have the upload solved

Joe
 
Glad you got the photo posting sorted. I'm going a chicken tomorrow ans I hope it looks as good as yours.
:points: For persistence.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky