or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Fridge/Freezer Builds › Freezer build/ help with adding Pid to control 2 - 220v elements
New Posts  All Forums:Forum Nav:

Freezer build/ help with adding Pid to control 2 - 220v elements

post #1 of 3
Thread Starter 
I have a big double door freEzer I made into a smoker. I have two heating elements wired to the original knobs. Came out of a 220v stove top.

I am looking to get some instructions to wire up a pic controller to those two elements. Looking for instructions that are easy to follow. Seen a lot of the Pid controllers that are wired to an outlet set up.

I am looking to have a Pid controller that I can set a temp to are desired setting. That kick the burners on and off accordingly.

Thanks guys in advance feel free to text if have a response 3192694184
post #2 of 3
Thread Starter 
http://www.thermomart.com/electric-stove-control-element-wood-furnace-thermostat

Also have seen this but not sure if this would be able to be wired in with the burners
post #3 of 3
Thread Starter 
Has anyone wired the stc 1000 to their smokers?? Look fairly simple but wasn't sure if it's work with brinkman smoker elemen
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Fridge/Freezer Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Fridge/Freezer Builds › Freezer build/ help with adding Pid to control 2 - 220v elements