BEEF STICKS 21MM with Legg's # 116 ... MONEY SHOT ....

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Doug, morning...... If you have an Ace Hardware near you, they may have it.... that's where I got mine.... Or Grainger has it....

http://www.grainger.com/product/Tub...m/rp/s/is/image/Grainger/4EEF9_AS01?$smthumb$

http://www.grainger.com/product/K-S-PRECISION-METALS-Metal-Assortment-16NH30?opr=APPD&pbi=4EEH5

http://www.amazon.com/s/ref=sr_in_-...+tubing&ie=UTF8&qid=1448115821&rnid=702513011


....Retailers that may carry it....
http://www.ksmetals.com/RetailLocations.html

Using a flaring tool, gently heat the end of the tube to anneal (soften) the metal... expand the end.... reheat,.... expand..... until you have a decent flare that will stick in one of the tubes you have... Done....

You have to be sure the tube you get fits the flaring tool or it won't flare... That's why I chose 1/2"....

You may have a retailer near you... check the list.. the tube has a HUGE ID that helps reduce pressure in your stuffer...
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky