Doug, morning...... If you have an Ace Hardware near you, they may have it.... that's where I got mine.... Or Grainger has it....
http://www.grainger.com/product/Tub...m/rp/s/is/image/Grainger/4EEF9_AS01?$smthumb$
http://www.grainger.com/product/K-S-PRECISION-METALS-Metal-Assortment-16NH30?opr=APPD&pbi=4EEH5
http://www.amazon.com/s/ref=sr_in_-...+tubing&ie=UTF8&qid=1448115821&rnid=702513011
....Retailers that may carry it....
http://www.ksmetals.com/RetailLocations.html
Using a flaring tool, gently heat the end of the tube to anneal (soften) the metal... expand the end.... reheat,.... expand..... until you have a decent flare that will stick in one of the tubes you have... Done....
You have to be sure the tube you get fits the flaring tool or it won't flare... That's why I chose 1/2"....
You may have a retailer near you... check the list.. the tube has a HUGE ID that helps reduce pressure in your stuffer...
http://www.grainger.com/product/Tub...m/rp/s/is/image/Grainger/4EEF9_AS01?$smthumb$
http://www.grainger.com/product/K-S-PRECISION-METALS-Metal-Assortment-16NH30?opr=APPD&pbi=4EEH5
http://www.amazon.com/s/ref=sr_in_-...+tubing&ie=UTF8&qid=1448115821&rnid=702513011
....Retailers that may carry it....
http://www.ksmetals.com/RetailLocations.html
Using a flaring tool, gently heat the end of the tube to anneal (soften) the metal... expand the end.... reheat,.... expand..... until you have a decent flare that will stick in one of the tubes you have... Done....
You have to be sure the tube you get fits the flaring tool or it won't flare... That's why I chose 1/2"....
You may have a retailer near you... check the list.. the tube has a HUGE ID that helps reduce pressure in your stuffer...