Chimney for MES

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

mummel

Master of the Pit
Original poster
Apr 8, 2015
2,294
64
Massachusetts
Guys, is there is section for chimney mods for MES smokers for guys using them indoors?  I want find out what rating insulation is required, what parts guys are using, safety considerations etc.  Thanks.
 
I don't think you would need to insulate the chimney but if you do, standard duct insulation is not sufficient. You would want fire rated insulation to be safe. You will need to set it up in a way that the duct run can be as straight up and down as possible. You don't want condensation to buildup and run back into your smoker. 
 
If the duct runs straight up, wont the condensation run straight down into the smoker?  I had the idea of putting a smoker in a vertical storage shed, and installing a chimney on the roof.  That way you could close the doors if it starts to rain or a storm comes up.  It will also keep toddlers away.  But I figured the insulation would need an S shape to prevent water running down directly into the smoker? 

On the insulation - do they sell pre-insulated fire rated ducts at Home Depot or Lowes? 
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky