or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Fire basket handle...
New Posts  All Forums:Forum Nav:

Fire basket handle...

post #1 of 6
Thread Starter 
What are folks using as a handle on the top of the basket?
post #2 of 6
MIne has a threaded rod across the top. I have a rebar hook I bent to grab it with.
post #3 of 6
Thread Starter 
Quote:
Originally Posted by dirtsailor2003 View Post

MIne has a threaded rod across the top. I have a rebar hook I bent to grab it with.
By any chance would you have a picture of it? I made the basket square with angle iron corners, I put a piece of rear thru 2 of the corners. It makes putting charcoal in the basket difficult.
post #4 of 6

I've built several and use the bail (handle) from a five gallon bucket.  Just use pliers to remove the plastic hand grip.

post #5 of 6
I use two wire coat hangers to lift out.
post #6 of 6

I took 1/4" rod and made a handle...

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Fire basket handle...