I am in need of assistance again for another build.
This is for a woodburning stove for Winter Tent Camping. This will be used in a 11x20 tent on our Mancamp trip Next February to Green Ridge State Park, so I have some time.
I will be using a 40lb Fork Lift Propane bottle
I want to do a flat top but I am afraid of too much welding, the flat top would be for cooking and coffee and stuff.
These are not my photos.
I may just weld on a flat piece on top of the radius.
or something like this
The front would be designed like this one, keeping it simple
there would be a bottom piece for insulation instead of sand.
a grate would be above to allow airflow.
stack would be 4" sections stored inside stove, legs would be 1/2" threaded black pipe that screw into threaded caps or connectors that will be welded to the bottom.
I will nee a baffle that sits below the stack hole so the heat has to go around the hole to exit, of course I will need a damper on the pipe and a spark arrestor.
I was thinking about a Stack robber, but the jury is still out on that one.
I can buy a cheapo for 65 or 70 bucks, but rather build a quality one customized to what I want.
Edited by SQWIB - 2/10/15 at 1:04pm