Custom Intake Suggestions?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

bamasmokin

Newbie
Original poster
Feb 4, 2015
1
10
Hey guys, building my second UDS and considering something other than the standard pipe and cap for intakes, but coming up short on ideas. You guys have any ideas, photos, and suggestions?
Thanks in advance.
James
 
years and years ago I made one.. cut a square hole out on the side at the very bottom and just used a rock to open and close the hole up... worked really well... only used it to smoke mullet ....
 
Be looking forward to seeing pics

Gary
 
The Gateway UDS looks to have a pair of 1.5 or 2 Inch pieces of Exhaust Pipe welded to the side, extending up with a Side Sliding Intake Valve made about like the Exhaust Stack Top on most Offsets.

You would probably need a muffler shop to put a 90 on the end of the pipe, Then Chop Saw it close at an angle.

259hoqg.jpg


Bob
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky