Will post some pictures later today but am gathering materials for building a RF from a 24" x 69" 120 gallon old air tank. It is 3/16" thick, minus whatever rust I find when the door is cut out. This will be ground mounted on casters or wheels. The support frame came from the integral aluminum frame of a Navy carrier ship's desk which was never installed. Feet on the desk frame are steel explosion welded to aluminum, so I'll use the frame upside down so the feet can be welded to the tank. More to come later today. This is my first smoker build and my first real welding project. Lots of welding equipment, limited skills/knowledge.
Edited by storeman0913 - 2/21/15 at 2:50pm