or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › "Say It Ain't So", Another 120 Gallon Build ?
New Posts  All Forums:Forum Nav:

"Say It Ain't So", Another 120 Gallon Build ? - Page 2

post #21 of 22
Thread Starter 
ok.. so I have been searching for gaskets for the FB and CC door's... Should I go with flat or round... I also found a "how-to" replace flat gasket on a BGE and they say to "bunch" the flat up instead of leaving it lay flat... any suggestions on that If I go with flat ?... Anybody have any experience with the Lava Lok self adhesive gasket ??

Also on my door (22" x 22") for the FB.. I came up with 5 - 2" x 4" vents... I was going to put 3 in a row across the bottom and 2 towards the top ... problem is I can't get 3 in a row across the bottom... I would need 24" ... can I put 2 in a row and 1 on top of that row ?? I am also gonna go play with the calculator again and see If I can come up with something different just in case ...
post #22 of 22
Thread Starter 
DUHHHHHH me.. after looking through dannyp's build.. I can't believe I didn't think of putting my vents this way...

http://www.smokingmeatforums.com/t/169367/buildfor-dannyp-few-question-bare-with-me/40#post_1312342

Thanks for knocking me upside the head Danny and making me see the light...
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reverse Flow
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › "Say It Ain't So", Another 120 Gallon Build ?