or Connect
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › General Discussion › How to build a firebox that works
New Posts  All Forums:Forum Nav:

How to build a firebox that works

post #1 of 2
Thread Starter 

I built a smoker out of a 60 gallon air compressor tank. I had originally designed it with the fire in the bottom on a grate with the air intake on the bottom left hand side. This system has not worked all that good, so I would like to put a firebox at the location where the air vent is now. I am looking at using a steel pipe about 12 to 16 inches in diameter and about 24 inches long. Any one know of plans for a firebox?

post #2 of 2

http://www.smokingmeatforums.com/t/172425/standard-reverse-flow-smoker-calculator-by-daveomak-and-others-ready-to-use-rev-4#post_1264161

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Discussion
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › General Discussion › How to build a firebox that works