or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Other Builds › Vertical smoker build
New Posts  All Forums:Forum Nav:

Vertical smoker build

post #1 of 18
Thread Starter 
post #2 of 18
Thread Starter 
[IMG]
post #3 of 18
Thread Starter 
post #4 of 18
Thread Starter 
post #5 of 18
Thread Starter 
post #6 of 18
Thread Starter 
post #7 of 18
Thread Starter 
post #8 of 18
Thread Starter 
post #9 of 18
Thread Starter 
post #10 of 18
Thread Starter 
post #11 of 18
Thread Starter 
post #12 of 18

Interesting build. Tell us about it. If I saw that in the woods I would be thinking redneck still :biggrin:.

Happy smoken.

David

post #13 of 18

Either a still or waiting for blast off !!!     How does it smoke ?       Unusual design I like it 

 

Gary

post #14 of 18
Thread Starter 
Just did a test run. Works pretty good as far as even heat and can get up to 400 degrees f. Worked better than I hoped for.
post #15 of 18
Thread Starter 
The fire box is 30 inch pipe with two baffles in to get indirect heat. Lower baffle also serves as water tank to as steam. Has 2 dampers 6x6 for air to fire box. Cooking chamber is an old concrete mixer with 6 rpm motor spinning the racks inside. Building one more rack for doing ribs. Put a draft booster fan on the recirculating tube to take smoke from the top and blow down. Convection smoker? Material is 3/8 to 1/2 so it is real heavy but holds heat well.
post #16 of 18
Thread Starter 
post #17 of 18
Thread Starter 
Temp is very even top and bottom
post #18 of 18

That's pretty darn close

 

Gary

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Other Builds › Vertical smoker build