or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › portsmoker project 2014
New Posts  All Forums:Forum Nav:

portsmoker project 2014

post #1 of 12
Thread Starter 
Here's my project
post #2 of 12

no-pics.png

post #3 of 12
Click the box to the LEFT of the PAPER CLIP, in the reply box, to upload you pics from your computer....
post #4 of 12
Thread Starter 
Here my build coming along
post #5 of 12
always interested in a brick and block smoker.. I'm in ...
post #6 of 12
Thread Starter 
There you go guys tell me what you think. Im put in a angle beam support to carry up the load to my chamber . But im also hide the angle beam with the firebrick . Then form the outside with normal brick.
post #7 of 12
Thread Starter 
Quote:
Originally Posted by JckDanls 07 View Post

always interested in a brick and block smoker.. I'm in ...
post #8 of 12
Looks like a good start! I'll be sticking around to see where this goes!
post #9 of 12
Thread Starter 


This is the motor im using . flue set its amazing.
post #10 of 12
Thread Starter 
i went from this start of project . To the recent one i uploaded. I been almost month and 10 days on this project. Had a lil problem beacuse it had a limestone pad on top covering the blocks . And i found out lime stone no good so i had to break it a part and start from firebrick finsish with fire brick complete the cap it off then do 2 nd normal brick on the outside. That's my plans
post #11 of 12
Thread Starter 
here an updated on my project .
post #12 of 12
Thread Starter 
got the angle beam going in.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoker Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › portsmoker project 2014