or Connect
SmokingMeatForums.com › Groups › UK Smokers › Discussions › me again lol

me again lol

post #1 of 10
Thread Starter 

was wondering wat you nguys use to make a mesh charcoal box thanks

post #2 of 10

Expanded metal , like has a lot of little diamond shaped holes in it ; used in construction. I would guess 1/8" would be adequate.

 

Later . . .

post #3 of 10

Hello.  I think you have a chargrill offset smoker.  Maybe I am wrong.  I would use the existing charcoal grate as a template and build, have built a grate from 12mm concrete reinforcing steel.  It's cheap and will last longer than the smoker.  Rotate it every smoke as believe it or not the heat will warp 12mm.  If you want a basket the expanded metal is the way to go.  Just my opinion.  Keep Smokin!

Danny

post #4 of 10
Thread Starter 

thanks again guys its for a basket for my offset smoker it will make things easier

post #5 of 10
Thread Starter 

just looking see were can get it in northwest uk

post #6 of 10
Thread Starter 

just looking see were can get it in northwest uk

post #7 of 10

Hello Paul.  Check E-Bay.  May folks on there will sell you just about what you need delivered to your door.  No need to buy a whole sheet.

Danny

post #8 of 10
Thread Starter 

thanks danny already checked no luck lol

post #9 of 10

WHAT!!  YOU CAN'T FIND IT ON E-BAY??  Well it doesn't exist!  :icon_biggrin:  I am sure you can find a metal merchant in your area but it may not be cheap.  Wish I had other ideas.  Good luck.

Danny

post #10 of 10

Deleted

  Return Home
  Back to Forum: UK Smokers
SmokingMeatForums.com › Groups › UK Smokers › Discussions › me again lol