Char Griller Pro Smoke Stack Extension (using aluminum flashing and warmer rack)

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

bbqjanto2015

Newbie
Original poster
Jul 20, 2014
9
10
Great forum!!

Thanks to all the great hints, I have done most of the "standard" mods--including building a charcoal basket.  I tried to extend the vent with a semi-rigid aluminum duct, but found that 3" was just too small and 4" was just too big.  I could not find one that was just right (the "Goldilocks problem").  I even tried 4" duct with a 3" clamp, and the duct kept unraveling.  I ended up using aluminum flashing, but was initially bummed at losing my warmer rack.  Solved that problem by "modifying" the rack so that the vent goes through it (see pictures).

Next up:  address the heat loss from the side and back of the main grill and baffle.  Thus far, I've smokes (hickory and pecan) a few Boston butts and they came out great!


 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky