or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Smoker build question
New Posts  All Forums:Forum Nav:

Smoker build question

post #1 of 3
Thread Starter 
Hello I'm new here, I'm building a cabinet type smoker, I have a few questions.
1- I'm building the cabinet out of mild steel and do you need to remove the mill scale on the steel on the inside of the cabinet?
2-what kind of stainless steel do I need for the racks?
Thank you Steve usa.gif
post #2 of 3
Remove the mill scale and oil, from processing..... mild steel expanded metal works for grates.... coat both with cooking oil and heat to set the oil for a good coating.... repeat as necessary..... 304 SS is cheaper than 316 and works very well.... whatever is in your budget... expanded metal needs a framework to support it...
post #3 of 3
Thread Starter 
Thank you for the info, that was exactly what I needed to know.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoker Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Smoker build question