or Connect
New Posts  All Forums:Forum Nav:

Tired of painting

post #1 of 7
Thread Starter 
Damn can't keep paint on this pos. damn spray can junk I should have primed it to start with I have never painted a piece of bare metal in my life. And no it wasn't sand blasted should not need to be it was sanded and da'ed with 80 and 120. Been painting cars my whole life never had paint come off. I think I'll just let the bastard rust.
post #2 of 7

Relax Dude. It's just paint. Take a break, think about it, have a beer and then figure out what you need to do to fix it. You already know this, but I'll say it anyway, A paintjob is 99% prep, 1% paint.

post #3 of 7
Thread Starter 
Yes I know I paint cars that's y it pissed me off so much every body said don't prime it but they have 2000 degree primer for a reason.
post #4 of 7

Paint it with oil or lard just like you seasoned the inside and you will get the same type finish on the outside which will prevent rusting

post #5 of 7
Thread Starter 
post #6 of 7
Thread Starter 
post #7 of 7
Thread Starter 
the only place I'm not loosing paint is the firebox. Go figure huh.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reverse Flow