or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › Baffles
New Posts  All Forums:Forum Nav:

Baffles

post #1 of 3
Thread Starter 

Would like your opinions.  Would you reccommend tuner plates, ceramic tiles, solid full-length 

plate with varying size holes? What would be the benifit/downside to each?

 

What width would I cut them to allow sufficient clearance underneath?

 

 

 

Thanks.

post #2 of 3

Hello and Welcome to our addiction.  A word of warning: There is no 12 step program for this one!  Many good folk here with a load of experience that they are more than willing to share.  If you have specific questions just start a thread and someone with experience will be along soon to offer advice.  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have, and pictures help a bunch.  Spend some time doing some research on the forums, tons of advice and recipes already available there.  Check out Jeff’s 5 day smoking E-Course ( link below ) that will help you get started.  We look forward to your contributions.  Have fun.  Good luck.  Keep Smokin!

Danny

 

http://www.smoking-meat.com/smoking-basics-ecourse

 

Let us know what smoker you have and we can then offer better advice.

Danny

post #3 of 3

Hello and welcome to the Forum. Like Danny said, smoker type with pictures for best advice

 

Gary S

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › Baffles