or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › Opinions needed on this smoker
New Posts  All Forums:Forum Nav:

Opinions needed on this smoker

post #1 of 3
Thread Starter 
Hi everyone. I am shopping for a new smoker. I found this one and will probably look at it today.
It is a little more substantial than I need, but that is only a minor concern. What I need for someone more experienced than me is an honest critique of this basic design. It just seems like there may be too much going on for this smoker to work well. What are your thoughts? Here's a pic.
post #2 of 3

That's a pretty common design. Looks like with 2 stacks you could shut off an unused section. If 1/4" Steel, looks like a good deal...JJ

post #3 of 3
Thread Starter 
I would have thought the vertical box would be above the firebox so all the airflow would be traveling the same direction. As it is, the air flow will have to be split between the vertical cook chamber and the horizontal RF cook chamber.
I am wondering if the design will allow for proper draw back across the horizontal chamber.
Does that make sense?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reverse Flow
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › Opinions needed on this smoker