or Connect
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › General Discussion › old old hobart slicer sharpener help
New Posts  All Forums:Forum Nav:

old old hobart slicer sharpener help

post #1 of 4
Thread Starter 

http://i1277.photobucket.com/albums/y494/thinktwicez71/10168292_10152391585645439_1467832043_n_zps301f6788.jpgI got an old Hobart slicer from my grandfather .  it runs fine and needs a really good cleaning before I would ever use it , but the sharpener has me stumped .  it seems like it only has 1 stone , and maybe a round steel disk for the other ?   I cant even figure out how the second stone would even attach to the spot where it would go.  the sharpener is different than a lot of Hobart slicers I have researched online , this one has a selector switch that moves the stones , has a 1 for 1 stone , 2 for the second spot , and off.

 

problem is I can get it to sharpen the 1 side of the blade , and not the other , but then again im not sure how this sharpener is designed to work .

 

here are the pictures and the sharpener im talking about , any help with this project would be appreciated.

 

http://i1277.photobucket.com/albums/y494/thinktwicez71/10168929_10152391584190439_833041134_n_zpseb3e7a76.jpg

 

http://i1277.photobucket.com/albums/y494/thinktwicez71/10168292_10152391585645439_1467832043_n_zps301f6788.jpg

http://i1277.photobucket.com/albums/y494/thinktwicez71/10157011_10152391586440439_487296204_n_zps9b913173.jpg

 

http://i1277.photobucket.com/albums/y494/thinktwicez71/10173478_10152391588000439_1707844671_n_zps1f196e91.jpg


Edited by thinktwicez71 - 4/19/14 at 1:30pm
post #2 of 4
Thread Starter 

It seems like a lot of this unit is made from brass , the sharpener assembly seems like its solib brass and heavy

post #3 of 4

Have you tried it.  On a slicer blade, only one side needed to be sharpened and the other side just the filings smoothed down/taken off

post #4 of 4
Thread Starter 

i think I got it , there is an adjustment screw on the top of this sharpener that lowers the stones into the proper position and then 2 set screws to tighten it .  I got it adjusted right now .  just needs some more sharpening and a good cleaning and its ready for use

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Discussion
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › General Discussion › old old hobart slicer sharpener help