1st post. Char-griller smokin pro mods and maiden voyage. Qview beef ribs and chicken.

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

caesars0331

Newbie
Original poster
Apr 9, 2014
9
10
New Jersey
Well, I finished the standard char-griller mods this morning, and after seasoning I figured I'd give her a test run on a whole chicken and some lean beef ribs.

The only novel modification that I incorporated into my smoker was to use some "u-channel" instead of  "z-channel" as is often seen on these smokers.  

No baffle/tuning plates, nor did I flip the charcoal pan.

Ribs were rubbed with 2:3 salt to pepper and the chicken received a salt/pepper/brown sugar/chili powder rub.


1/2"x1/2" u-channel with 5/8 stove gasket



While the stove rope and u-channel was very effective, I had a severe air leak occurring at the door of the SFB.  This lead to temps shooting to 325*.  Some foil fixed this and brought the temp spike back down.


Once I found the sweep spot on the smoker, I could relax for a moment and tried a new strong ale.  Decent.


I kept it at 225* for most of the smoke.  I probably should have gone a bit hotter for the chicken, but I was more concerned about making sure I could run at 225* without a struggle.


About 4 hours in.  Ribs pretty much done.


The red/pink color is exaggerated in this image, but you can see they were pretty skimpy ribs.


A bit of chicken.  I took this up to 170 in the breast and let it rest for 30min.


All said, I am very happy with this smoker.  Tomorrow I will be smoking a 5lbs brisket flat, a rack of baby backs, and some hot sausage.  More pics to come, then.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky