Couple of pork butts on a Yoder YS640

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

jtrainor56

Meat Mopper
Original poster
Apr 21, 2013
162
20
Sinking Spring, PA
Only had my Yoder a few weeks and decided to do two Boston butts I picked up from Sam's club.

Injected these with apple juice and rubbed with TastyLicks BBQ Original Rib Rub.

Also first time injecting, not sure if it added anything to the smoke.


Started at 8pm last night, we had winds between 22 and 30 mph so I turned the back into the wind

and use the welders blanket. Temps also dropped down into the upper 20's.


On at 240*. One on the tight took two hours longer.


Ready for foil, not much bark. Pulled at 165* foiled until they reached 203*. 

Let both rest two hours in the cooler before pulling.



Pretty good for my first time on the YS640, only did butts two other times on a Weber gasser.

I left them with very little sauce since most of it was put into one pound bags and dropped off 

to family. Not sure on yield since this is the first time doing a large quantity but 16 pounds

got me about 9 1/2 pounds of meat

 
Looks good man 
drool.gif
  Nice color! I'd say you did a fine job 
icon14.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky