or Connect
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › General Discussion › Smoker Modification Help for AMNPS
New Posts  All Forums:Forum Nav:

Smoker Modification Help for AMNPS

post #1 of 7
Thread Starter 

Ok so I have pretty much given up on getting my AMNPS to work as a cold smoker in my Masterbuilt.  So here is try #2.  I have obtained a Brinkman Electric smoker and removed the electric portion.  I set it up today as the pics show with the AMNPS in the bottom and it was close.  What would be the best ways to modify this smoker so that I have an awesome cold smoker with the AMNPS??

 

The lid does not have a chimney on it.  The lid has a slight gap all the way around where the smoke comes out but maybe its not enough?  Should I make more holes in the base?

 

 

post #2 of 7
I'm wondering why you can't get that AMNPS to work in your MES...have you contacted Todd to get his assistance? Especially for cold smoking, you might try ordering some of his dust. I'm sure Todd could get you on track.

Red
post #3 of 7
Thread Starter 

Yes I have spoke to Todd a lot on the issues.  And I see that everyone else that owns a masterbuilt analog has the same problem.  And without some major alteration's or Mailbox mod it won't work.  So I am going to another option to get the AMNPS to work.  I use my Masterbuilt to hot smoke a lot and don't want to compromise anything.  I have already done some mods to it and still no go.  So now I have this other smoker that I am willing to manipulate however I need too to get to work for my cold smoker.

post #4 of 7
I'm having great results with the AMNPS in my MES 40 using the mailbox modification. Never had a problem with it. hot or cold smoke works well.
post #5 of 7

Ok so I am new on the smoking scene and was planning on getting an AMNPS this saturday at one of the only stores that sells it in Canada, I have a masterbuilt propane 2 door smoker, the reason for getting the AMNPS was to cold smoke bacon and cheese, now you have me second guessing buying the unit, why is it not working for you?? So I can't just place the AMNPS in the bottom of my MPS and cold smoke??? Sorry not trying to hijack, anyone with info to help me out could PM me so we don't hijack this thread

 

 

Thanks CWS

post #6 of 7
Thread Starter 
I have MES analog elective smoker. All I get is thick white smoke. No clear smoke. I would suggest doing a search for your smoker and the AMNPS on here and see what others say. Or ask Todd.

If you want to use the AMNpS to burn pellets when hot smoking it works great.
post #7 of 7

I have a similar style electric smoker.  

 

Try it the way it is first.  If that doesn't work, this is what I did.  It works for both cold & hot smoking with amnps.

 

I used a 1" dia. hole saw to put (3) holes in the lid, just under the corner radius.  I also added (3) 1/2" dia. holes right near the bottom of the body.  Instead, you may want to drill holes in the base, from the inside right at the corner of the base.  You want these holes to be below the AMNPS, so as low as possible.

 

It works like a charm for me.

 

Don

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Discussion
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › General Discussion › Smoker Modification Help for AMNPS