or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Side Fire Box › 16" Pipe Reverse Flow
New Posts  All Forums:Forum Nav:

16" Pipe Reverse Flow

post #1 of 11
Thread Starter 
I have a patio side box smoker that is 16" diameter by 1/4" wall. The CC is about 30" and FB is 16"ish long. I was considering cutting off FB and adding it to the CC to make it bigger. Then I would build a new square FB for it. My question is could a 16" x 46" CC be made a reverse flow?
post #2 of 11
Thread Starter 
No help guys! Maybe tuning plates?
post #3 of 11
I don't see any reason why it couldn't be a reverse flow. Could go the tuning plate route too if you wanted. Size is personal preference. Are you wanting to add cooking area to an already existing cooker? Run your numbers through the build calculator for your new firebox size, and chamber/exhaust openings. Certainly do-able
post #4 of 11
I've been trying to remember where (or if) I saw it, but I think GaryS built a 16" reverse flow
post #5 of 11
Thread Starter 
Yes I need more room on my existing patio smoker.
post #6 of 11
Thread Starter 
Thanks for the reply TXSean!
post #7 of 11

No problem. Sounds like a fun little project and should be some god experience towards a future build?? ;) Don't forget to post pics and updates

post #8 of 11

Oh, and this is in the side firebox section, check out the reverse flow section if you haven't seen it already for more info and topics specific to reverse flow builds

post #9 of 11
Thread Starter 
I have built 2 reverse flow but they have been bigger pipes.
post #10 of 11
Nice, so you should be just fine then. Looking forward to seeing what you put together
post #11 of 11
Thread Starter 
It will probably be next fall before I mess with.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Side Fire Box
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Side Fire Box › 16" Pipe Reverse Flow