or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › Need advice on a smoker build
New Posts  All Forums:Forum Nav:

Need advice on a smoker build

post #1 of 4
Thread Starter 
I got this Foster blast chiller it is stainless steel inside and out I was worried about the insolation inside so I phoned the company they told me the insolation is ridged board polyurothain and if no open flame was touching it I should be good for temps. To 300 to 350 F. There is no insolation showing on the inside it is all sandwiched between the stainless do I need to worry about it leaching or should I be able to go ahead with this build? Any help would be great thanks.
post #2 of 4
I don't know about the insulation.... but man.... what a great score ....
post #3 of 4
Thread Starter 
It is awesome but if I have to rip it apart and take out all the insolation it will not be worth it for me so I sure hope I can use it like it is it will make one hell of a smoker!!
post #4 of 4

Maybe a cold smoker ?, I really don't think that type insulation will hold up in a RF or SF type smoker. You will have some hot spots, especially where the FB connects to the CC, You sure don't want that stuff melting.        On insulated we use mineral wool.

 

Gary

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reverse Flow
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › Need advice on a smoker build