Backwoods clone build done

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

ufo8mycow

Newbie
Original poster
Jan 24, 2014
21
10
I finished my Backwoods clone build last night and brought it home this morning and I figured I would share some pics of her. based my design off of some plans I found in another backwoods clone build thread and modified them to fit my needs.

I went with 16 gauge hot rolled steel (should have used cold rolled) 14 gauge rectangle tubing and 3/4"x1/8" angle iron the total build cost was under $500 including all the hardware. The stainless top was some leftover from a previous project so it is not included in the cost.

The cook chamber is 18" wide by 24" deep and 24" tall and the firebox is 18"x24"x12" with a fire basket that  is 16.5"x22"x8.5" and should be able to hold about 35 lbs of Kingsford. I made the firebox so big so that I can hopefully get 12+ hour burn times without refueling so that I can run it while I am at work and not need tho ask my wife to add charcoal. the intake is a 2" coupling that was cut in half and a piece of flat bar tack welde to the back of it so that I can use the threaded damper that is in there now or I can take the disk out and thread in a 2" pipe and a ball valve if I ever decide to  I also built in a bbq guru port so that if I decide to get one down the road I wont have to use an adapter. I also made an adapter that you can see is in the last picture for my pitmaster iq110 that will attach to the hose and plug into the guru port.




 
Last edited:
I got her fired up for seasoning run this morning. I had about 11 pounds of Royal Oak lump and lit about 10 chunks in the chimney and dump it in one corner. It took about half an hour to get up to 100 then I added about 2 gallons of boiling water to the pan and it took about another hour to get up to 225. I've been taking it pretty slow so it doesn't get out of hand on me.

the wife is decided she wants burnt ends this weekend so I will be cooking my first ever brisket on a brand new cooker. this should be an adventure. I will be using my pitmaster iq110 so hopefully it will be just fine.
 
Thanks For compliments.

The handles are R-35 refrigerator latches and they came from refrigeration hardware supply for about $35 plus shipping but I have since found hem cheaper on ebay for $20 shipped.

As for the name I havent come up with anything yet Any sugestions?
 
Last edited:
The handles are R-35 refrigerator latches and they came from refrigeration hardware supply for about $35 plus shipping but I have since found hem cheaper on ebay for $20 shipped.

As for the name I havent come up with anything yet Any sugestions?

Thanks i'll chrck em out!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky