or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › What would you do? Smoker Build....
New Posts  All Forums:Forum Nav:

What would you do? Smoker Build....

post #1 of 11
Thread Starter 

Hello Folks! I recently got this dbl oven from my work. I have all the electrical components stripped out of it. The first photo is of the front of the oven. I wish I would have taken a photo of the back when i had the panel off. So that I didnt get a photo of the back I did my best a drawing out what the back looks like. It has two squares cut out where it had fans to circular to circulate the heat in the oven. It is 2 separate ovens they each had there own heating elements. If you had this how would you build it? I was thinking of putting a fire box on the back of it however would one fire box distribute enough heat equally? Im thinking that it wouldnt. Thoughts? Input? Ideas? Insults? Yeah rights all welcome LOL. Thanks, JT


 

 

 

post #2 of 11
Thread Starter 

I have been reading many different threads. Thinking maybe electric or propane may be the way to go?? What do you think?

post #3 of 11

first can you give us the sizes of the oven .
 is heating element at the bottom or the top ?
do you want to make a big smoker or two small smokers.
what is your budget ?

post #4 of 11
Thread Starter 
Would like to make one smoker. The oven is at my work however they are about the same size as a regular household oven. Elements and all electrical components have been stripped out.
post #5 of 11

I will go for a electrical smoker  it is easy to control and you can use any type of wood pellets or sawdust .

however it won't give you hi temperature .

but we got here great guys they will give you more advice .

just have fun with the build.

post #6 of 11
I would use electric like Ahron mentioned... an AMNPS for smoke.... probably a 1200 - 1500 watt element on a PID controller...
post #7 of 11
Thread Starter 

I was leaning more to electric. I do not have access to 220v just 110v. So I would have to put in a new element in each oven, each of them being 1200-1500 watts. Would I need one or two PID controllers? Thanks again for all the input.

post #8 of 11
The PID experts can fill you in...... It was just last week I finally learned how to spell PID....
post #9 of 11
Thread Starter 

I get this when i post a link in my reply. "Because you're new here, your post is being held for moderation. Once approved by a moderator, it will be published on the site. Thanks for your patience."

post #10 of 11
Quote:
Originally Posted by seksmoker View Post

I get this when i post a link in my reply. "Because you're new here, your post is being held for moderation. Once approved by a moderator, it will be published on the site. Thanks for your patience."


Must have had pictures in it.... Our computer/door guard ain't too bright.... You out to see some of the stuff that gets through.... Kind of like the TSA at airports.... biggrin.gif
post #11 of 11
Thread Starter 

LOL Lets try this. Element info: Evaporator, element, 120 volt, 1500 watts, double

                          PDI info: Dual PID Digital Temperature Control Controller Thermocouple REX-C100CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), default quality

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoker Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › What would you do? Smoker Build....