or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › 30" smoke hollow
New Posts  All Forums:Forum Nav:

30" smoke hollow

post #1 of 5
Thread Starter 

New and have done some seasoning, Smoke not there yet, the unit has two vents on botom sides and one on top back side. I need how to adjust,

post #2 of 5

Pilot, I keep the top one open all the way and the lower ones closed down. I use the Amazen tube pellet smoke generator and get about 5 hours of smoke.

Also I have the needle valve mod to fine tune the heat.

 

GeneK

post #3 of 5
Glad you joined us rcpilot, congrats on the new Smoke Hollow and welcome1.gif from North Dakota!
Your top vent on the back side should be the exhaust and this should be completely open whenever applying smoke. The bottom 2 vents are for controlling air/smoke flow, these you will just have to experiment with and the settings will normally differ pending outside temperature and wind direction.
post #4 of 5

texas.gifHello and welcome from East Texas. This is a great site, lots of information and great people that are willing to throw in their two cents worth on about anything.   

 

Gary

post #5 of 5

Welcome to the forum again RC

 

Typically you leave the top vent open and adjust your temp by the lower vents. Use our search tool. I bet you'll get an answer for your specific model. 

 

I You ve come to the best place for great information on smoking and many other types of cooking! Many friendly people here that love to help. Also make the search button your best friend. There are over a million post in this forum. That powerful information on a vast array of subjects right at your fingertips. Brian

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › 30" smoke hollow