or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Fridge/Freezer Builds › galvinized exhauast piping ? is that ok to use
New Posts  All Forums:Forum Nav:

galvinized exhauast piping ? is that ok to use

post #1 of 8
Thread Starter 

iv have a old chimney ven tin my garage and that's a class b vent and was wondering if i can go galvanized exhaust from the smoker to it with out worrying about those nasty fumes of zinc i do not have and galvanized parts in my smoke just the exhaust i would like to user it on ..any suggestions?

post #2 of 8

Hello Brad.  So long as you maintain an air flow from your intake to the outlet; which you will do to maintain temp and control the smoke, you will be fine using that galvanised on the exhaust stack.  Good luck.  Keep Smokin!

Danny

post #3 of 8
Thread Starter 
The intake is alum from the mail box mod then out with alum to the galvanized to chimney. Thanks Dan..
post #4 of 8

I don't think it would be a problem, I went with a dryer vent hard pipe snapped it together and put a damper in it.

 

http://www.smokingmeatforums.com/g/i/154104/fridge-smoker-2/sort/display_order/

 

Good luck and let us know

 

Any pics of it. ???

post #5 of 8
Thread Starter 

where did you find the damper?

post #6 of 8

Local heating dealer had them I think it was like 10-15 dollars and he installed it in the pipe for me. Google 3 or 4" dampers see what you can come up with, I will check also and let you know

 

Good luck

post #7 of 8

http://www.ebay.com/itm/Speedi-Products-AC-VDQ-04-4-Inch-Diameter-Galvanized-Duct-Volume-Damper-w-Quad-/360796683161?pt=LH_DefaultDomain_0&hash=item5401287b99

 

This one would work great for you I think just put a nylock ntu on and install remember the handle is the way damper is so vert. is open and horz is closed

 

Hope this helps

post #8 of 8
I know this is a very old post but I used a galvanised Steele pipe to connect my iq 110 to. I did however put about6 Coates of high temp pain't on it. The pipe does not go all the way to the pit. It stops right at vent. Here is a pic. Homemade coupling or offset. Works better than the "dog bowl " it came with. The PVC piping that came with it ended up melting.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Fridge/Freezer Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Fridge/Freezer Builds › galvinized exhauast piping ? is that ok to use