or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Temp control on MES Digital 30"
New Posts  All Forums:Forum Nav:

Temp control on MES Digital 30"

post #1 of 4
Thread Starter 

New to smoking and bought an MES 30 for my first smoker. Using it for the 2nd time, first time using my Maverick wireless thermometer set. I have my smoker set at 235 degrees which it seems to hold fairly well according to the control box thermometer. My Maverick however fluctuates wildly from 199 to 250 and never really settling down to a constant temp.

 

Not sure which thermometer to believe and I find it hard to believe that the temp is fluctuating that much in the smoker. Any suggestions on how to get control over this? Thanks.

post #2 of 4
Be sure your probes are plugged in all the way and the wires are not crimped
post #3 of 4
Thread Starter 

Thanks. They don't appear to be kinked and are plugged in all the way. I anticipated that the onboard thermometer in the MES would probably be off. Looked initially reading about 10 degrees hotter than the Maverick was reading. The MES seems to hold pretty steady and the Maverick bounces around. Seems to have stabilized a bit but still seems like more movement than is actually happening. I'll triple check the cables.

 

Jeff

post #4 of 4
Had a coupke do that to me over time. .... one was just a probe that had gone bad. Replaced it and it was good to go. Maybe you got one bad out of the box. Or you might want to reverse the probe ports and see if the probe bounces around in the other port or the port is bad.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Electric Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Temp control on MES Digital 30"