or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › First-timer's mods to Char-Broiler SFB
New Posts  All Forums:Forum Nav:

First-timer's mods to Char-Broiler SFB

post #1 of 3
Thread Starter 

The offset got the usual mods of tuning plates, large charcoal basket, large brick heatsink, and baffle. I also sealed the side firedoor to keep cold air out with a welded door jam. I also sealed the stack, but did not make the extension on the inside, as it already is only four inches off the grate. The mods worked great during seasoning, keeping the temps at 250 on both sides always within 10 degrees, usually within 5 or less, with adjusting the fire or stoking it three times for six hours once the temp was set.

 

 

 

 

post #2 of 3

Nice looking work there, steam.  Now we need to pictures of some 'Q'!!!

post #3 of 3

Nice work

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Charcoal Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › First-timer's mods to Char-Broiler SFB