or Connect
SmokingMeatForums.com › Groups › ECB Owners Group › Discussions › need help modding my ecb

need help modding my ecb

post #1 of 7
Thread Starter 

just got it about a month ago and not really sure where to start on modding it out. 

post #2 of 7

This is a must read (link removed).  and this one (link removed)


Edited by Tread - 11/14/13 at 5:17am
post #3 of 7
Thread Starter 
Thanks, I think I found what ill be doing this weekend.
post #4 of 7

Stephen 1855;

 

Most of us have done a lot of mods to our ECB's. Start with reversing the legs and resting the pan on bricks and then getting the gasket to seal the lid.

 

There are some really good posts already on the ECBOW. What are you thinking about doing first? 

post #5 of 7
Thread Starter 

start with messing with the pan to get some extra airflow and not smoother my coals and getting a new temp gauge. the reversing the legs and getting bricks will probably be done as well.

post #6 of 7

1000

 

1000

 

Don't forget extra holes in the fire pan. Playbox sand instead of water for higher temps. My firepan rested between three concrete blocks. Easy to lift the smoker right off the pan to add more coals when need and you didn't lose the heat. Depending on how I vented the blocks, I could easily add air flow. A full pan of coals could deliver 450º, so I was able to cut down on the amount of charcoal I used by quite a bit.

post #7 of 7
Quote:
Originally Posted by stephen1855 View Post
 

just got it about a month ago and not really sure where to start on modding it out. 


Just google "ecb mods". There's plenty to read.

  Return Home
  Back to Forum: ECB Owners Group
SmokingMeatForums.com › Groups › ECB Owners Group › Discussions › need help modding my ecb