just a bunch of pics.....i have some things to add yet , but it should be good to cook with, i haven't done anything in her yet, but i did season her with some oil and some heat to keep her from rusting.
I named it AquaLung since that was the color of the drum when i go it...you ready for this...FREE. it was a plastic lined drum with no liner, no lid, but that didn't matter to me, i was going to put a dome lid on anyway.
I searched craigslist and found a sunbeam for $20, i needed a lid and grates, so i bought it. them i searched the scrap yards for expanded metal, found a 18" x 55" piece for $15...paint cost me $15 for three color with primer , i may regret the paint, but time will tell, i was convinced by another group of bbq'ers i did not need high temp paint, i am still sceptical. so my total cost so far $50.
since i never throw anything away, i have casters in the basement, some 2" x 6" for making a roller dolly, still got a handle from the sunbeam, found a wire rack i can modify for a shelf...i hope... and probably will add hooks and stuff as i go. any way the pics
looky inside pre burn, inlet holes drilled
outside inlet holes - 1" to take a 3/4" nipple
FIRE!!
Notice the incomplete burn on the bottom why i do not wish to use any barrel with chemical, i just don't feel like i can ever get it clean without a sandblast
all scrubbed and inlets installed
inside - cleaned
Cheap basket with handle i made from wire
grates installed
almost there
lid fits, i had to cut the rolled lip off to make it work
dirty and thirsty
custom paint with spray cans...
thanx for looking
I named it AquaLung since that was the color of the drum when i go it...you ready for this...FREE. it was a plastic lined drum with no liner, no lid, but that didn't matter to me, i was going to put a dome lid on anyway.
I searched craigslist and found a sunbeam for $20, i needed a lid and grates, so i bought it. them i searched the scrap yards for expanded metal, found a 18" x 55" piece for $15...paint cost me $15 for three color with primer , i may regret the paint, but time will tell, i was convinced by another group of bbq'ers i did not need high temp paint, i am still sceptical. so my total cost so far $50.
since i never throw anything away, i have casters in the basement, some 2" x 6" for making a roller dolly, still got a handle from the sunbeam, found a wire rack i can modify for a shelf...i hope... and probably will add hooks and stuff as i go. any way the pics
looky inside pre burn, inlet holes drilled
outside inlet holes - 1" to take a 3/4" nipple
FIRE!!
Notice the incomplete burn on the bottom why i do not wish to use any barrel with chemical, i just don't feel like i can ever get it clean without a sandblast
all scrubbed and inlets installed
inside - cleaned
Cheap basket with handle i made from wire
grates installed
almost there
lid fits, i had to cut the rolled lip off to make it work
dirty and thirsty
custom paint with spray cans...
thanx for looking
Last edited: