Off set smoker converted to propane with amnps......Help

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

bigdavejr

Fire Starter
Original poster
Jun 17, 2012
41
12
San Tan Valley, Arizona
I have a offset the I converted to propane and I want to use the AMNPS for hot smoking as well as cold smoking. I have a small dutch oven in the fire box over the burner that I used to use for wood chips. I have tried placing the AMNPS in the cooking chamber ans it goes out. I tried placing it on top of the dutch oven and the whole thing wen up in flames. I turned the dutch oven over so the flame could not get to and it did not go up but the whole thing smoked as if I lit the entire AMNPS. Lastly I placed it on the rack about 3 inches above the upside down dutch oven and still the entire thing ignited? Any suggestions?
 
Its mounted to the bottom of the fire box. I could fab a new mount an raise it though but would the flame not consume the smoke I thought I read some posts stating that would happen. I may have figured it out, opposite the fire box in the cooking chamber there is a drain hole I will fill it and do a test run today.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky